It’s no secret that ovens can give us some trouble every now and then, but today we’re zeroing in on one particular issue with Whirlpool oven not heating. This can be a real frustration, and it’s a pretty common problem. But don’t you fret; we’ve got all the insider information on how to get that oven of yours up and running like it’s brand new again. If you’re looking for common solutions for oven not heating, you’ve found the right place.
Why is My Whirlpool Oven Not Heating?
Is your oven not heating up? If your Whirlpool oven is not heating, it can be frustrating and make meal prep difficult. However, there are several common reasons why an oven may not heat, ranging from a faulty igniter to a damaged temperature sensor. In this article, we will explore the most common causes of a non-heating Whirlpool oven and provide simple steps you can follow to diagnose and potentially repair the issue. For troubleshooting oven not heating, keep reading this guide.
Faulty Oven Igniter (Gas Oven)
The igniter is one of the most important parts of your Whirlpool oven, and it’s also the most likely culprit when your oven isn’t heating up properly. If your oven not getting hot is causing a problem, it may be due to the igniter. The igniter has two main jobs: first, it draws electricity through the oven safety valve to open it, and second, it gets hot enough to glow and ignite the gas in the oven burner. If the igniter gets weak, it may not open the safety valve correctly, and if the valve doesn’t open, well, then your oven won’t heat up.
To determine if the igniter is the problem, observe it when your oven is turned on. If the igniter glows for more than 90 seconds without igniting the gas flame, that’s a sure sign that the igniter is too weak to open the valve. If that’s the case, it’s time to replace the igniter. And if the igniter doesn’t glow at all, don’t you worry, grab a multimeter and test the igniter for continuity. If there’s no continuity, it’s time to replace the igniter.
Faulty Bake Element (Electric Oven)
The bake element is a critical component in your oven and plays an important role in ensuring that your food is perfectly cooked. When functioning properly, it should glow red hot as it heats. However, if you notice that the element is not glowing, this may indicate that it’s not working as it should. If you suspect the bake element has burned out, simply look at it. If you see any visible damage, such as holes or blisters, this may be the cause of the problem. To confirm, you can use a trusty multimeter to test the element for continuity. If the bake element has indeed burned out, it’s best to replace it to ensure your oven is back to its full potential.
Faulty Control Board
If your Whirlpool oven not heating is causing a dinnertime disaster, it could be due to a faulty bake element. The control board of an oven plays a crucial role in ensuring the proper functioning of the bake and broil elements or igniters by sending the necessary voltage. If the control board is not working as it should, the voltage transmission may be interrupted, leading to a Whirlpool oven that refuses to heat up. To diagnose the issue, one can visually inspect the board for any damage or signs of a shorted component. Additionally, using a multimeter and referring to the appliance’s wiring diagram can help determine if the voltage reaches the bake, broil elements, or igniters.
Faulty Temperature Sensor
An oven’s temperature sensor is a crucial component that ensures that your cooking is consistent and accurate. The sensor monitors the temperature inside the oven and helps to maintain it at the desired level. If the temperature sensor is not working properly, your Whirlpool oven may not heat up at all.
To determine if your oven’s temperature sensor is faulty, you can use a multimeter to test for a proper ohm reading at a specific temperature. By doing this, you can easily identify if the part is defective and in need of replacement.
It’s essential to keep your Whirlpool oven’s temperature sensor in good condition to ensure that your cooking always comes out perfectly. Regular checks can help prevent unexpected kitchen mishaps and keep your oven functioning properly.
There can be various reasons for a Whirlpool oven not heating properly. From a faulty igniter, bake element, control board, or temperature sensor to something as simple as an issue with the electrical connection. Regular maintenance and proper troubleshooting can help diagnose and resolve the issue.
If the problem persists, it is always recommended to seek professional oven repair assistance. Choose the local appliance repair experts at Athens Appliance Repair!
