Welcome to our all-inclusive FAQ on LG washer error codes! In this guide, we will provide you with valuable information on how to fix common error codes on your LG washer, how to enter diagnostic mode, and how to reset specific codes. So, if you’re wondering, “how do I fix the error code on my LG washer”, let’s dive right in!
Common LG Washer Error Codes and Solutions:
Ready to learn the strange language known as LG washer error codes? This guide with help you identify the specific error code displayed on your washer. Once you know the code, follow the troubleshooting steps recommended by LG or consult the resources provided to resolve the issue.
Understanding the E1 Error Code
The E1 error code on LG washing machines indicates a water supply issue. To resolve this, check if the water tap is fully open, and the water inlet hose is not kinked or blocked. If the problem persists, clean the inlet filter or contact a professional for assistance.
What Is Error Code E2 on LG Washing Machine?
The E2 error code is an Auto-Stop Protection Error, indicating an issue detected by a sensor. This error code requires professional service. Attempting to repair the issue yourself may lead to further damage or void the warranty on your washer.
What Does CL Mean on an LG Washer:
The CL error code signifies that the Child Lock feature has been activated. For many washers to deactivate the child lock, just press the child lock button for about 3 seconds. The CL code should disappear, and you can resume using your washer. Consult your manual if this doesn’t turn the child lock off.
Understanding UE Error Code on LG Washing Machines
The UE error code indicates an unbalanced load in the washer. To resolve this issue, pause the washer, open the door, and redistribute the laundry evenly. Close the door and resume the wash cycle. If the problem persists, reduce the load size and try again. If you’re having issues with a noisy washing machine, this is a common cause.
How Do I Reset the OE Code on My LG Washer?
The OE code on your LG washer indicates a problem with the drain, such as a blocked drain hose or a clogged filter, if your washer is smelling bad, this is a likely cause.
To reset the OE code, turn off the washer and unplug it. Check the drain hose for kinks or blockages, and straighten or clean it as needed. Remove and clean the pump filter. Refer to your washer’s user manual for instructions on how to do this. Plug the washer back in and turn it on. The OE code should now be cleared.
How Do I Put My LG Washer in Diagnostic Mode?
To enter diagnostic mode on your LG washer, turn the washer off and unplug it from the wall socket. Press and hold the ‘Wash/Rinse Temp’ and ‘Spin Speed’ buttons simultaneously. While still holding the buttons, plug the washer back in and turn it on. The washer should now be in diagnostic mode, which will allow it to check on potential problems.
We hope this guide has answered your questions about LG washer error codes and helped you troubleshoot any issues with your washer. Remember to consult your user manual and the resources provided for additional information and guidance. With a little patience and some basic troubleshooting, you can keep your LG washer running smoothly and efficiently, and for any washing machine repair issues you can’t fix, the team at Athens Appliance is always here for you.
